Author |
Topic: GPRO Organiser - A Tool for GPRO |
8421 replies
|
|
Quote ( Paul Grigore @ April 19th 2019,21:59:51 ) What new patch? Where from? Read some comments!
|
|
|
|
|
|
|
|
|
did not work for me the original patch.
|
|
|
Quote ( Andrei Daroczi @ April 20th 2019,18:03:44 ) did not work for me the original patch. Hi,
If ou have GO installed, you just have to use the patch by replacing the go.exe with the new one who is in the archive ^^
|
|
|
Quote ( Vladimir Blagojevic @ April 16th 2019,17:42:24 ) You have to download new patch. Please give me a link old (majberg... not working)
|
|
|
|
|
neither the original GO doesn't work nor the patch. it just doesn't help at all.
|
|
|
Quote ( Mitja Lazar @ April 30th 2019,18:11:26 ) neither the original GO doesn't work nor the patch. it just doesn't help at all.
It does. You need to replace the original go.exe file with the patch one.
|
|
|
With the Quote ( Michael Franks @ April 30th 2019,18:25:47 ) Quote ( Mitja Lazar @ April 30th 2019,18:11:26 )
neither the original GO doesn't work nor the patch. it just doesn't help at all.
It does. You need to replace the original go.exe file with the patch one. With the go.exe from extracted patch archive, if you have problem, you can contact me via PM
|
|
|
You must have all of the GO files in the same directory!
|
|
|
Quote ( Mitja Lazar @ April 30th 2019,18:11:26 ) neither the original GO doesn't work nor the patch. it just doesn't help at all.
Find where are GO files installed. After you find that folder, open patch and extract files into that folder.
As a standalone, patch files wont work. Patch files need original files to function.
|
|
|
Hi,
is there anybody who gets an error on GO when parsing Race Analysis page? Seems that energy data at Qs addition has broke the tool.
|
|
|
Not good for me either. Empty few pages. Strategy Practice Qualify Testing
(Monte Carlo)
|
|
|
|
Quote ( Jesús Pérez @ May 25th 2019,11:06:51 ) Hi,
is there anybody who gets an error on GO when parsing Race Analysis page? Seems that energy data at Qs addition has broke the tool. One update was made 1 month ago ^^
Actual version works (testted just now)
|
|
|
Quote ( Sébastien Boulanger @ May 25th 2019,11:51:28 ) Actual version works (testted just now)
I've just installed the patch and it's ok. Thank you so much.
|
|
|
Sébastien! Forgot to save before the race? I do not think.
|
|
|
Tibor, You haven't data for Monte Carlo ?
If you have Race Analysis and Sponsor then it's really a common mistake of not saving. Get the go.dat file and also the go.old and contact me via PM to send me them.
Or open the .old, this is the previous version of your file, you can effectively see when you save your datas.
|
|
|
Monte Carlo: Pre-competition data is missing what I mentioned. I'm trying to find out. The chaos on my machine is so hard to find.
Thank you very much for your help. If I succeed, I'll write.
I always pay attention to saving. After your (patch), your GO always works well.
|
|
|
if i, sometime, need to update the app? Would it reset the collected datas?
|
|
|
You have to update when New version is à aimable only 😉 And you loose nothing, there is a upgrade data system from a long ago in the app and i continue it
|
|
|
|
I've tried and tried and I'm still trying. But I don't find any go.exe by right clicking on GO icon, neither install directory
What is the way ?
|
|
|
Dear Sébastien! GO page. Bottom right corner. "New version available" readable.
Go_3.2.21_Original_Setup.exe Go_3.2.21_Patch.exe
Not a mistake?
|
|
|
There is no New version.
The original site has a DNS problem, i don't know if it Will be permanent or not.
I'll try to release à New version with New host as soon as possible but i've a lot of work this days
|
|
|
Quote ( Sébastien Boulanger @ June 5th 2019,16:08:46 ) There is no New version.
The original site has a DNS problem, i don't know if it Will be permanent or not.
I'll try to release à New version with New host as soon as possible but i've a lot of work this days Sir ! Thank you very much.
|
|
|
Quote ( Emmanuel Manfre @ May 30th 2019,03:04:12 ) I've tried and tried and I'm still trying. But I don't find any go.exe by right clicking on GO icon, neither install directory
What is the way ?
@Emmanuel Manfre (M5) remind me to help you tomorrow if you haven't the solution 😇
|
|
|
He is right but most people isn't aware of this problem. When you try to locate GO by going into properties all you get is "open file location" greyed out. I don't know is this because of the system or program itself but it is how it is. I did manual search for it and create new shortcut to the root folder.
|
|
|
Quote ( Vladimir Blagojevic @ June 6th 2019,01:14:52 ) He is right but most people isn't aware of this problem. When you try to locate GO by going into properties all you get is "open file location" greyed out. I don't know is this because of the system or program itself but it is how it is. I did manual search for it and create new shortcut to the root folder. Using properties works fine on my system. The 'open file location' is not greyed out and opens the windows explorer as expected. Using Windows 10.
|
|
|
Where does it leads? To start menu or to executable in install folder?
|
|